Cantilever Rack in Connecticut
Structural Cantilever
Delivered and Installed
Connecticut Cantilever Rack
Cantilever Racking Across Connecticut
Connecticut is home. Our yard is in Plantsville, so cantilever towers, arms and bases headed anywhere in the state are a short drive away, and most orders ship within 48 hours.
Lumber dealers, steel and pipe distributors and fabrication shops from Bridgeport and New Haven to Hartford and Waterbury run cantilever rack for long loads that won’t sit on pallet rack. Tell us your longest piece and heaviest bundle, and we’ll size the towers and arms and quote freight and installation together.
Ships in 48 Hours
Most cantilever orders leave our Plantsville yard within 48 hours, headed to your site in Connecticut.
Installed by Our Crew
Our crew installs cantilever rack across Connecticut, including setting arm heights and bracing the run.
Sized to Your Load
Tell us your longest piece and heaviest bundle, and we’ll size the towers, arms and bases to match.
Components
Cantilever Components We Ship to Connecticut
Structural Towers
12′ and 16′ towers rated 11,600 lb single-sided and 23,200 lb double-sided.
Arms
48″ x 4″ arms rated 2,750 lb and 60″ x 4″ arms rated 2,100 lb.
Bases
48″ and 60″ single-side bases. Double-sided towers take two.
Brace Sets
48″ and 60″ brace sets tie towers into a rigid run.
Build a system and get a confirmed quote on our cantilever rack page, or see what used cantilever is in the yard.
Compare
Single-Sided vs. Double-Sided
Single-sided towers go against a wall. Double-sided towers stand in the middle of the floor with arms on both sides, so one row serves two aisles and carries twice the load per tower.
| Single-Sided | Double-Sided | |
|---|---|---|
| Access | One side | Both sides |
| Best for | Wall runs | Center rows with aisles on both sides |
| 12′ tower capacity | 11,600 lb | 23,200 lb |
| Bases per tower | One | Two |
| Common use | Lumber yards, pipe storage | Steel distribution, fab shops |
Why A&A
Cantilever From a Yard That’s Been Here Since 1939
A&A Surplus has sold warehouse equipment out of Plantsville, Connecticut since 1939, and we carry a BBB A+ rating. We stock structural cantilever components, not light roll-formed rack, and we’ll size the system to your actual loads.
Need pallet rack or shelving too? See our pallet rack in Connecticut and steel shelving in Connecticut.
Our Google Reviews
FAQ
Connecticut Cantilever Rack Questions
Do you deliver cantilever rack to Hartford, New Haven, Bridgeport, Waterbury or Stamford?
Yes. We deliver cantilever rack across Connecticut, including Hartford, New Haven, Bridgeport, Waterbury and Stamford. Most orders ship from our Plantsville, CT yard within 48 hours. Call 1-800-826-5326 for a freight quote.
Do you install cantilever rack in Connecticut?
Yes. Our crew installs cantilever rack across Connecticut and can take down your old racking in the same visit. Call 1-800-826-5326 for an install quote.
How do I size cantilever arms and towers?
Arm length should match the depth of your load, and the number of arms depends on the length of the material, so long pieces don’t sag between arms. Tower height and capacity come from how many levels you need and the weight per level. Our cantilever racking guide walks through it, or call and we’ll size it for you.
Do you sell used cantilever rack?
Yes, when it comes in. Used towers and arms arrive as we buy out buildings, so stock changes. See our used cantilever rack page or call for what’s in the yard this week.
Do you buy used cantilever rack in Connecticut?
Yes. If you’re closing or clearing out a building in Connecticut, we buy used cantilever and other material handling equipment and handle the removal.
Cantilever Rack for Your Connecticut Yard?
Call Monday to Friday, 7:30 a.m. to 4:00 p.m. EST, or send a quote request with your material, lengths and weights.