This is our old website. Please click here for our brand new website!!



    Home     About Us     Financing    Locations     Contact Us     Quote Request     Bargains     Policies   
For All Questions, Quote Requests, or other Inquiries Please Call us at 1-800-826-5326  

Pallet RackCantilever RackSteel ShelvingLockersBins & TotesConveyorStorage CabinetsWire ProductsDock EquipmentVidmar CabinetsForklifts


8' x 6' Bed Installation Instructions


A -  Pan Bracket 

B -  Right Side Impact Tray Bracket

C -  Left Side Impact Tray Bracket

D -  Shelf Clip

E -  T-Bolt and Nut


F -  Unarco T-Bolt Crossbeam

G -  Left Side Shelf Beam

H -  Right Side Shelf Beam

I  -   Front and Rear Roller Support Beam

J  -  Shelf Support Beam


K -  Front Shelf Beam

L -   Pan Front Sheet

M -  Impact Rear Sheet




1 -  Start by standing uprights and attaching the T-Bolt Support beams (F).   Attach using T-Bolts/Nuts (E).   Install 1 across the top front, 1 - bottom front,  1 rear top, and 1 rear bottom.  


2 - Next attach the right and left shelf beams (G) & (H) to the uprights using the shelf clips (D).  Position them so that the multiple "box" shaped cutouts are pointed towards the front of the shelf.   If you look at the photo that shows (G) and (H) they are actually pointed in the direction that they should be installed.   The rear of the shelf should be even with the edge of the upright.  (see photo below).    The photo also shows that the rear clip should go through the last "opening" in the right and left shelf shelf beams.  


3 -  Coming from the rear of the shelf,  install rear roller support bar (I) with the "teeth" pointed towards the inside of the shelf.   To install,  slide end of roller support bar into side shelf beams (G) and (H).   See photo below.  It shows how far to slide it and the tabs that need to be tapped in to secure them and keep them front further sliding.  



4 -  Install 2 Shelf Support Beams (J),  into tabs in left and right side shelf beams (G) and (H).    See photo below.



5 - Coming from the front of the shelf,  install front roller support bar (I) with "teeth" pointed inward.  


6 -  Install roller tracks.  This is done by pinching the bottom of the tracks and fitting them down over the teeth in the front and rear roller support bars (I).   Once you have done that,  it will be clear where the front roller support bar (I) should be positioned along the side shelf beams (G) and (H).   **** This will also show which tab will need to be tapped in on the side shelf beams (same as how it was done for the rear roller support beam....step 3)


7 - Install front shelf beam (K) onto side shelf beams (G) and (H).    See photo below.


8 - Attach shelf tray bracket (A) to front shelf beam (K) and front roller support beam (I).   See photo below.  

Once that is complete,  lay tray panel (L) in place so that it catches the lip on the front shelf beam (K) and lays over the "slope" on front roller support beam (I).  See photo below.


The front is we need to finish the rear.



9 -  Install Right and Left Impact Tray Brackets (B) & (C) in right and left side shelf beams (G) and (H).  This is done by inserting the tabs on the brackets into the openings on the side shelf beams and sliding towards the rear.   See photo below.


10 - Lastly.....install the rear impact tray (M) by fitting the side edge into the middle tab of the impact tray bracket (B) and (C).   See photo below.



Installation is complete and the shelf should look like this......see photo below.





Used Akrobins Used Flex Conveyors & Expandable Conveyors Used Modular Shelving Used Rolling Ladders
Used Automotion Conveyor Used Nestaflex Conveyor, Used Flex Conveyors Used Modular, In-plant, Prefab Offices Used Roller Conveyor
Used Accordion Conveyor, Used Flex Conveyor Used Frazier Push Back Rack Used Lift Tables, Used Scissor Lifts Used Skatewheel Conveyor, Used Gravity Skatewheel
Used Balers Used Forklifts, Used Lift Trucks, Used Forklift Trucks, Used Kingway Flow Rack Used Small Parts Cabinets
Used Bulk Rack Used Forklift Chargers Used Overhead Conveyor, Used Overhead Chain Conveyor Used Spantrack
Used Bestflex Expandable Conveyor Used Flow Rack, Used Carton Flow, Used Span Track Used Packaging Equipment, Used Packaging Machines Used Stack Racks, Used Nestainers
Used Cantilever Rack, Used Lumber Racks, Used Pipe Racks Used Floor Scrubbers Used Pallet Flow Rack Used Steel Bar Grating
Used Gravity Pallet Conveyor, Used Gravity Conveyor Used Furniture Rack, Used Furniture Storage Racks Used Pallet Flow Rail Used Steel Shelving
Used Cantilever Rack Used Guide Rail Used Pallet Rack Accessories Used Structural Rack
Used Carts Used Gravity Conveyor, Used Roller & Skate Gravity Conveyor Used Pallet Rack Decking, Used Wire Decks Used Storage Bins
Used Case Sealers for Sale Used Galvanized Pallet Rack, Used Rack Storage Used Pallet Rack Supported Mezzanine Used Telescopic Conveyor
Used Conveyors Used Guard Railing & Used Pallet Rack Railing Used Pallets Used Tire Racks
Used Carpet Rack, Used Roll Storage Rack Used Gravity Pallet Conveyor, Used Gravity Conveyor Used Pallet Jacks Used Totes
Used Carton Flow Rack Used Industrial Fans Used Pallet Rack, Used Racks, Used Pallet Racking Used Unarco Flow Rack
Used Carton Flow Rack Pick Modules Used Industrial Floor Sweepers, Washers, Scrubbers Used Plastic Bulk Containers Used Vidmar Cabinets
Used Containers, Used Baskets, Used Waste Trucks Used Industrial Shelving, Used Warehouse Shelving Used Pnuematic Scissor Lifts Used Wire Decking & New Pallet Rack Wire Decks
Used Conveyor Systems, Used Conveyor, Gravity, Power Used Industrial Cabinets & Drawers Used Push-Back Rack Used Workbenches
Used Dockboards & Dockplates Used Lockers Used Record Storage Rack Used Warehouse Shelving, Used Shelving Industrial
Used Drive-In Rack Used Metro Shelving Used Reel Rack Used Warehouse Pick Carts, Used Picking Carts and Trucks
Used Drum Rack Used Rack Supported Mezzanine, Used Mezzanines Used Rivet Lock Used Wire Shelving, Used Metro Shelving, Used Metro Carts
Installation, Teardown, & Relocation Services We Purchase Used Material Handling Equipment
Design & Consultation Service Pallet Rack Style Guide
Engineering & Technical Support Cantilever Rack Guide
Used Pallet Rack Information Guide 1 Used Pallet Rack Information Guide 2
What Is Pallet Racking? Cantilever Rack Accessories
What Is Cantilever Racking? Push Back Racking Information
Rack Sizing Warehouse Rack Style Guide
Pallet Rack Safety Picking the Right Storage Solution
Design Your Warehouse Rack Pallet Rack Terminology
Warehouse Space Rack Supported Structures

A&A Surplus Inc. is headquartered in Plantsville, CT. 


Home     Quote Request     About Us    

All Content 2010 A&A Surplus Inc. ∙ 389 Marion Ave. - Plantsville, CT 06479 - USA